On Wed, 19 May 2004 12:42:31 -0500, Harmon Seaver
<hseaver@CYBERSHAMANIX.COM> wrote:

>  I've got a brand new pair of H&R wheel spacers that I'm about to put on ebay,
>thought I'd try here first. These will work with Mercedes, Porsche, or VW alloy
>wheels. These are the DRA type, and use the 10mm studs. H&R #5055665, are 50mm
>thick and have the 66.5mm center hole.
>  These are unused, I bought them then decided to use a different wheel with
>17mm studs after I'd had them too long to return. I want $125 plus
>shipping. Cost me $150.
>

I'm sorry, I misspoke when first sending this. The bolts are 12mm
diameter, not 10mm. And 1" thick (25mm) not 50mm. I guess I was not fully
awake this morning. These are the type of adapters that bolt on to the hub
with your stock wheel bolts, then have their own set of 12mm bolts to hold
the wheel onto the adapter/spacer. And they are the 112x5 bolt pattern.

  http://www.hrsprings.com/site/frameproducts.html