Jim,

I finished the same job a while back; I also put in the table.  The seats
are easy.  Just mount drill and attach; remember to get all the hardware for
the seats.  I also only put in only one of the jump seats; I want to put a
swivel base on the front passenger seat.  Kind of a digi-wife throne.

If you put in the table it is wise to know that the bench seats are
different and that you will need to do a little cutting and welding.
Measure twice cut once.

Jere
90 Carat-a-version
88 GL

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Jim Arnott
Sent: Sunday, May 23, 2004 9:48 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Seats?

So here's the deal...

A close friend has a standard 7 passenger GL.  He wants to remove the
center bench and put in the two rear-facing single seats like are found
in Weekenders.  Having never been down that road, he asked me about the
do-ability of said swap. Well... I've never been down that road either.
  Can anyone offer words of wisdom? Chris, you have a pair of seats in
blue?

TIA.

Jim