Should fit just fine if they are the same size.... I often refer to VWs as
"Parts bin bastards" as so many parts are interchangeable.  You can get
polyurethane inserts for the A1 mounts as well, if you REALLY want to firm
things up.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

Due to the large volume of email  we  receive,  PLEASE  include  previous
emails when responding.  This will allow us to read the complete dialogue
in one message and will result in quicker and more  accurate  responses.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Ryan Press
Sent: June 3, 2004 6:22 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Transaxle mount, possible source A1 chassis?

My front transaxle mount is shot again.  This is a used one I picked up.
The price of a new mount is about $125.  It looks to me like the right
side motor mount from an A1 chassis VW will fit; they both are 75mm in
dia, not sure about width.

Has anyone tried this?  I was actually planning on installing the VW
Motorsport A1 mount with the firmer rubber, for the way I drive. :)  This
performance mount is only $24, but I would need to press the old mount out
of the Vanagon bracket, and press the new one in.

Ryan