Great info.  I've been trying to figure out the easy way to do this for
some time.  Now, is there an existing wire running from the area of the aux
battery to the fuse box that can be re used for this purpose?  Seems like
there would be one.

Edward

At 07:10 PM 6/7/2004, you wrote:
>It is very easy to move that stuff to the aux battery. You don't even
>need to pull the fuse block down. Put it back, checking that you did not
>loosen any of the connections on the back side.
>
>All you need to do is remove fuse #3 and LEAVE IT OUT.
>Then put a male spade connector on the #12 wire you ran up to that area.
>Then plug that male spade into the BOTTOM slot where fuse #3 was pulled
>from.
>You are done.
>
>
>This only works on 1986 and newer. Be sure to put a fuse on the #12
>wire, right near the aux battery.
>
>Mark