Although what you say here is true, the difference really is that you
can turn in one direction a hair tighter than the other. No one would
really notice this. The easest this to do is relocate the sterring wheel.

            Eric                   86-VW4x4
            vw4x4@fyi.net          86-SS Syncro
            Pittsburgh, PA USA     1936-Chrysler
                                   92-Jetta GWC
            www.fyi.net/~vw4x4/vw4x4.htm

On Thu, 10 Jun 2004, Evan Mac Donald wrote:

> You must be mindful of just arbitrarily resetting the steering wheel back to center by pulling it off, and straightening it up. The relation between the steering wheel and the rack center point should not change during an alignment - so if your steering wheel is offset, so now is your rack! The alignment job not only needs to make sure the road wheels are in the correct relation to each other, but also that they are in the correct relation to the rack! If not, well.... Check your Bentley!
>
>
>
> Evan Mac Donald
>