

| Subject: | where to buy H4 connectors for lights (was RE: Ecode light report ) |
| From: | Andrew Gies |
| Date: | Tue, 15 Jun 2004 10:47:21 -0500 |
I have an '86 that I am changing from the old square lights to 7" H4's. Anyone know if you can buy the H4 connectors so you can cut off the old connectors and splice in the H4's? Andrew -----Original Message----- From: Chris S. [mailto:MrPolak@YAHOO.COM] Sent: Tuesday, June 15, 2004 10:08 AM To: vanagon@GERRY.VANAGON.COM Subject: Ecode light report I installed Cibie H4 ecode headlights in Hershey (http://www.knology.net/~vwghost/hershey/) last night. If you haven't done this already, what are you waiting for? The difference is tremendous with a flat, wide, even beam of light which lights up the entire roadway and the sides instead of projecting just two hot spots in the middle as with the DOT headlamps - these are MUCH better than Sylvania Xtra Vision on Camel (http://www.knology.net/~vw/dadada.jpg). It's an easy upgrade since the H4 bulbs plug into the existing sockets. It was well worth my $40. Chris S. '85 Wolfsburg Westy "Camel" http://www.knology.net/~vw/dadada.jpg ******************************************************************* CONFIDENTIAL - This e-mail transmission and any documents attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering this transmission to the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of this transmission is strictly prohibited. If you have received this transmission in error, please immediately notify the sender and destroy the original transmission, attachments, and destroy any hard copies.
Have something to add on this topic today? Revive this thread in the forum »