No, this is not a lecture about VD, boys and girls. ;-)

I replaced the sway bar on the front of Hershey due to a broken
right sway bar down link.  I had to literally POUND the broken
stud out of its mount because it was rusted solidly in place.  I
took a good look at the front suspension, the good link along
with its sleeve and here are my thoughts:  The sway bar links
look as if they need to be able to rotate and move along with
the front suspension and react to any play in the front bushings
under braking and cornering forces.  When your links rust in
place, possibly because the van sat up long enough for rust to
form, this slight movement is no longer possible which puts
excessive side loads on the skinny links.  Then you either hit a
big bump with one wheel or brake forcibly and  PANG! - you've
got yourself a broken down link.

I'd like to hear what others think of this and if you think
semi-annual lubage of the links, sleeves and bushings with some
waterproof grease would help to reduce the likelyhood of this
type of failure.

May the lube be with you,

=====
Chris S.'85 Westy Camel -> http://www.knology.net/~vw/dadada.jpg'84 Westy Hershey -> http://www.knology.net/~vwghost/hershey/'01 NB TDI -> http://www.knology.net/~vw/Beetle.jpg