Brian,
Stock is 34.5mm long, this is correct for the rear studs of a Syncro and
2WD.  Syncro 16s had 41mm long studs at the rear.  This measurement is from
the start of the shank of the stud to the end of the threads.

I stock 46mm long studs and 53mm long studs.  The 46mm are $20 CAD / $14.50
USD for a set of five and the 53mm long studs are $25 CAD / $18.25 for a set
of five.

David Marshall

Fast Forward Automotive Inc.
4356 Quesnel-Hixon Road
Quesnel BC Canada  V2J 6Z3

http://www.fastforward.ca    mailto:sales@fastforward.ca
Phone: (250) 992 7775        FAX: (250) 992 1160

- Vanagon Accessories and Engine Conversions
- Vanagon, Transporter and Iltis Sales and Importation
- European Lighting for most Volkswagen models

Due to the large volume of email  we  receive,  PLEASE  include  previous
emails when responding.  This will allow us to read the complete dialogue
in one message and will result in quicker and more  accurate  responses.

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf
Of Brian T.
Sent: June 25, 2004 3:07 PM
To: vanagon@GERRY.VANAGON.COM
Subject: 2 wheel drive rear wheel stud length

I was wondering if anyone out in Vanagon land had the
specs for the stock rear wheel lugs on a 2 wheel drive
vanagon?

I am particularly interested in overall length

I need to come up with a longer than stock set to get
the correct 8 + turns on my new wheels.  Ronal's setup
only gives you 5.5 turns per nut and I don't feel too
comfy with that.

Thanks,
Brian