Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: 85 Vanagon throttle valve switch -- update
From:Tim Demarest
Date:Wed, 30 Jun 2004 00:57:59 -0400

Kyle,

Don't let it concern you much, it sounds like you've solved your problem.
If you are idling at 850, and you *don't* experience a serious hesitation
when starting up from a dead stop, then your throttle switch is doing it's
thing.

For those that are curious, the 1985 1.9 with manual trans has a
one-year-only single-switch setup. You can't see the switch from above
(it's buried beneath the plate at the bottom of the throttle body), but you
can get at the adjustment screws that come through the top of the plate.
There's an adjustment procedure in the Bentley.

Mine was bogging down when starting from a dead stop because the switch was
not opening when the throttle was pressed, leaving me trying to drive while
the idle stabilization circuit is trying to keep the idle at 850... I
"mis-adjusted" the mechanism, and now I don't always return to idle, but I
can pull away from a stop sign without hesitation. I

've been running this way for about eight months without any ill effects
(though I burn more gas than necessary if I'm stuck in traffic). I expect
to get in there and clean the throttle body, cam and switch (or replace as
much as necessary) any day now.

Tim

>I started the van up, after letting it dry for about half an hour... and
>it now idles at about 850rpm.
>
>Should this concern me as much as it does?
>
>-Kyle Hamilton

Have something to add on this topic today? Revive this thread in the forum »