

| Subject: | Re: oil idiot lamp lights&buzzes |
| From: | Joseph Fortino |
| Date: | Thu, 1 Jul 2004 08:07:22 -0700 |
all, my 1.9l started doing all kinds of nutty stuff, my wiring was cool because i just redid it not to long ago. It would flicker at high speeds then after that just stayed on lucky for me my buzzer does'nt come on just the light ;) anyway I hit pep boyes for a switch they sell me this nascar knock brand that turns out to be poop! get this after putting this in it just stays on, * great * I end up getting the correct VW part and not some knock off and waaaaalaa i'm okie now. ( so much for tring to get non VW stuff at the local flaps. Joe -----Original Message----- From: John Rodgers <jh_rodgers@BELLSOUTH.NET> Sent: Jul 1, 2004 7:01 AM To: vanagon@GERRY.VANAGON.COM Subject: Re: oil idiot lamp lights&buzzes I've lived through this myself. Check the wire that goes to the oil pressure sensor located in the engine case near the bottom of the crankshaft pully. Usually when that belt goes, it breaks the wire or separates the connection to the oil pressure sensor. Good Luck. John Rodgers 88 GL Driver Dennis Oost wrote: > Hello All, > Hoping you can head me in the right direction. > > Here are the stats: > 87 wolfsburg, 2.1 liter, 164k miles, > original heads and gaskets, leaks a little in cold weather > still holds steady mileage at 17-18/gal, good power, climbs hills in 3rd > oil changes every 2 to 3k , using valvoline 20/50 since 120k > > The question: > Lights for alt, oil, and coolant all light at same time, pull over right > away, look into engine an find primary belt in shreds. > Seems to be the obvious solution. > Always carry a spare and tools so I get it changed on the spot. It > starts, everything looks good, as I would expect. > A short way down the road oil light comes on with the warning buzzer > again, shut it down and pullover. Everything "looks OK". I start and the > same thing happens. > Oil level is ok, no oil in coolant, no coolant in oil, I cannot find any > clues. > I start it out of gear and watch, revving the engine and holding it for > a little while, things look and sound OK. > But as soon as I get in and begin driving, oil lamp and warning buzz > engage. > Could it be a faulty sensor? > Dennis >
Have something to add on this topic today? Revive this thread in the forum »