

| Subject: | Re: What snaps? Was: Passing another Westfalia |
| From: | Bob O'Shaughnessy |
| Date: | Sun, 25 Jul 2004 21:01:26 -0400 |
� �My lovely wife's grandmother told me that she once sat over the open engine lid of their family's Chevy Greenbriar for a trip home in the dark operating the throttle. � �My past accelerator cable problems had to do with wintertime freezeups when the metal tube in which the cable travels fills with ice causing the throttle to stick wide open. �*Not fun* � �I was able to fix the problem by re-fitting the rubber grommets that had fallen off both ends of the tube and filling the tube with WD-40. � The cable did eventually rust out and I had to replace it. �I was pleasantly surprised to discover that the replacement cable was coated in Teflon or some such to keep it both moving, and protected from rust. �I consider this a mandatory �upgrade on any of my vans. On Sun, 25 Jul 2004 16:44:25 -0400, Edward Maglott <emaglott@buncombe.main.nc.us> wrote: > I have even heard of folks with broken accelerator cables enlisting a 2nd > person to sit over the open engine bay and operate the throttle by > hand. Now that is scary! > > There is a connection at the front under the pedal that is where you make > one of the adjustments. The end of the cable is a metal rod, that gets > pinched by a bolt to hold it in the right place. This might have pulled > out if the bolt was not tight enough. Otherwise I am guessing the cable > itself, or something else under the pedal assembly. Not too hard to work > on. Take out the spare tire, put some cardboard under there on the spare > tire holder, and you have a nice easy chair to recline on while working on it. > > Edward > > > > At 04:13 PM 7/25/2004, you wrote: > > >I was wondering what is it that is prone to "letting go" in the chain of > >components under the circumstances I described? All the bits and pieces are > >shown in Bently section 20.31. Could be something as simple as one of the > >pins or bolts. > > > >I am now safely at home and do not intend any further use of my "hand > >accelerator". > > > >Phil > >'89 Westy > -- Bob O'Shaughnessy oshaughnessy@mac.com http://oshaughnessy.typepad.com
Have something to add on this topic today? Revive this thread in the forum »