Malcolm,

There's a concise description of the procedure on my website
(www.vanagonparts.com) under the "Technical Section".  Not too difficult a
procedure.

Cheers,

Jeff
www.vanagonparts.com

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
Of Malcolm Stebbins
Sent: Thursday, July 29, 2004 3:45 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Brake problem -- UPDATE

My brakes have too failed and after an exhaustive reading of the archives,
I'm convinced that my
van's (91 syncro) master brake cylinder has also failed.

Georgios, do you have a step by step write-up of the procedure for swapping
out the brake master
cylinder??  I could not find a step by step write-up in the archives.
malcolm

--- "Georgios A. Stylianides, PhD" <gstylia@TEMPEST.COEDU.USF.EDU> wrote:

>  So, I replaced the master cylinder.  Big difference in both braking and
no spongy effect at the

>  stop lights.

__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail