Somewhere before I owned my bus someone fabricated a piece of metal hose
(possibly brass or copper?) welded to a small tab. The tab has a hole in it for a
screw and it is screwed to the firewall. The rubber fuel line attaches to each
side of the metal line on each side of the firewall. I believe this set up
replaced the problematic plastic piece that carries fuel through the firewall.
Works great so far.

It seems to me merely passing a rubber hose through the hole in the firewall
would lead to the rubber line being severed by constantly rubbing against the
metal firewall.

Best
Jeff
83.5 Westfalia
LA,CA

In a message dated 8/3/2004 9:08:03 AM Pacific Daylight Time,
Thomas.Myers@USA.XEROX.COM writes:

> Are the fuel lines the same diameter on both sides of teh Tee?
>
>