In a message dated 12/08/2004 12:21:06 AM Eastern Daylight Time,
LISTSERV@GERRY.VANAGON.COM writes:

I just  wonder how you screw it back when the armest is attached to  the
pin/plate.
From the archive and looking at it, I am not sure what is  the best way
to put it back.

Jean-Pierre, the plate must first be removed from  the armrest by driving out
the spring pin.  Then attach the plate back to  the seat side with the two
screws using loctite on the threads.  Then  reattach the arm rest with the
spring pin.  It's a bit tricky getting the  holes lined up while trying to inset
the pin but it can be done.  I just  did a few of them last week.  Those two
screws are always coming  loose.  Using loctite on the screw threads is the
secret to keeping them in  place.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 09 ~ 12, 2005
'87 Westy, '90 Carat &  Lionel Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com