After a lot of futzing around last year, listmember D. Bierli (sp?)
suggested that I simply run a new ground from the water level system to
the car somewhere. I tested it with alligator leads and the LEDs began
working. So I git a drill and buzzed a new self-tapping screw into the
nearest available sheet metal and ran a new wire to the harness. Good
as new. Try this first.

Jim

On Aug 15, 2004, at 9:36 AM, David and Shirin wrote:

>     My wife and I and our 10 month old son just got back from a
> wonderful trip to the outer banks of North Carolina.  We bugged out
> early because of the storm but none the less had a great time.  The
> water level sender in my 1982 Westy no longer works, worked fine last
> year,  but this year we get nothing.  Do I need to replace or clean
> the bolts in the tank?  If so what parts do I need to make sure it
> seals back up nice and tight.  Are the bolts and seals still
> available?
>     By the way the fridge worked better than ever with two computer
> fans on the back and one inside the fridge, it stayed between 39 and
> 45 the whole time.
>
> David
> 1982 Westy.
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.726 / Virus Database: 481 - Release Date: 7/22/2004
>