Unfortunately, this is one of the hardest jobs in the vanagon.  With the
dash
removed this is a bear to get to.  You can cut a hole from outside the
vanagon
to grease and inspect the linkage, but removal will have to be done from the
inside.   Plan on a week for this project.  Fix other dash related problems
while your in there.   Try a lot of wd-40 first.
                                                     ERic

Jean-Woo Kim wrote:

>On my 87 GL Wolfsburg, I suspect severe wear on the roll pin that connect
>the actual clutch pedal and the pushrod on the clutch master cylinder. My
>clutch pedal has been making metal-grinding noise and a few times refused to
>come back up after I depressed it. Shifting is not all that great either
>inspite switch to Redline MT fluid. Now my question is, how do I get at it
>to take a look and confirm my diagnosis? My Bentley simply says I need to go
>through the instrument panel, but I would like to know how involved this is
>before I start taking out the brake components like the brake master
>cylinder and the booster. Thanks.
>
> Jean-Woo Kim
>
>
>
>