I have the Pertronix installed on an 009 distributor on my '91 van.  This is my van's second unit
(mechanic crossed the wires on the first unit during a visit to the shop). My experience is:  the
first Magnet Sleeve went on very easily, but the second was a real devil to get on.  I agree with
another post that a LOT of force will help, but be sure that the "shoulders" are well lined up
PRIOR to applying the force.

FWIW I am very happy with the unit, my van's Dwell had not changed a bit in 4 years.  M

--- Tom Young <tomyoung1@COMCAST.NET> wrote:

> The problem is that the magnet sleeve doesn't fit down far enough on the
> distributor shaft to allow the rotor to settle into its place.  It looks to
> be about 1/4" too high.  Looking inside the magnet sleeve I see 3
> "shoulders" that help orient the sleeve on the rotor shaft, but I'd guess
> they also are preventing the sleeve from descending.
>
> How have others dealt with this?
>
> TIA.
> ---------------------------------------------------------------
> Tom Young                       '81 Vanagon
> Lafayette, CA 94549         '82 Westfalia
> ---------------------------------------------------------------
>

_______________________________
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush