Here's info on how to do this on the Brickwerks, if you want to do this yourself.

http://www.brick-yard.co.uk/VehicleSpecific/T3/info/mods/hinge/hinge.htm

Regards,

BenT
sent from my electronic leash

On Mar 3, 2013, at 10:45 AM, Ben T <syncro@gmail.com> wrote:

> You can either make one yourself or buy. There were a few vendors offering them in Europe such as Winkler. In the US, I think VanAgain in NJ used to offer them. Possibly Detlev at International Motors in Livermore, CA. Those were from EU and may have been manufactured as a longer arm.
> 
> I had one made by a local welder. He cut the hinge arm. Then drilled and tapped each end. Installed a threaded rod. Then filled the void with welding rod. After which, he ground to match the original contour. Cost me $50. Unfortunately, I lost track of this fellow. I see on the Samba that Eric D. is offering to lengthen your hinge arms for $225. 
> 
> Don't forget that you also need to relocate the sliding door stop.
> 
> 
> Regards,
> 
> BenT
> 
> sent from my electronic leash
> 
> On Mar 3, 2013, at 10:22 AM, miguel pacheco <mundopacheco@GMAIL.COM> wrote:
> 
>> I'm trying to fit fatter tires on my Syncro and looking for that Sliding
>> Door extension. Anyone know of a good source? Is there more than one choice
>> and, if so, how do they differ?
>> Muchas Gracias!
>> 
>> Miguel