Hi Vince,

Thanks!

Regarding "right soldering iron", then I'm guessing a lower wattage for smaller jobs (circuit board work) and greater for larger (general wiring of connectors etc)?

Cheers,
Mike

Vince S <gipsyflies@comcast.net> wrote:
Mike,

The gauge of the solder is not at all critical as the right soldering
iron. The spool of solder I use say "44" rosin core. A very wide range
of solder gauge will work just fine. Just be careful not to over heat
the PCB or else you may lift the trace.

- Vince

http://gipsyflies.home.comcast.net
1989 Vanagon GL Camper
1993 Mazda Miata (for sale)
1996 Land Rover Discovery
2005 Mini Cooper S

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
Of Michael Rule
Sent: Saturday, September 11, 2004 1:57 PM
To: vanagon@GERRY.VANAGON.COM
Subject: LED solder gauge

Hi All,

A question for the Electronics Guru's: what gauge solder do you
recommend when replacing vanagon LED's?

Thankyou,
Mike

---------------------------------
Do you Yahoo!?
Shop for Back-to-School deals on Yahoo! Shopping.

---------------------------------
Do you Yahoo!?
Shop for Back-to-School deals on Yahoo! Shopping.