1) Set of 6mm-17mm combination wrenches, two of the 13mm.
2) One 6mm - 19mm shallow 3/8" drive six point socket set with a ratchet
handle and 3" & 6: extensions.
3) One 1/2" x 18" breaker bar with 19mm six point socket for breaking wheel
lugs loose.
4) One #2 Phillips, one straight slot screwdriver.
5) About four quarts of oil 40 wt or 15/50 Synthetic.
6) One tri square drive for CV bolts.
7) It helps to have a few feet of various FI line, Vacuum lines and a good
sized fire extinguisher on board.
8) In ten years of operating my 83 Air Cooled Westy the only thing I ever
used from my spare parts was the oil and another 12 quarts of oil when I
blew the rings off of #3 cylinder and drive 250 miles home at 35mph.
9) The tools listed in #1 -#4 are about all it takes to pull an engine and
put heads on it.

Stan Wilder
More Power with Performance Coatings
http://www.engineceramics.com

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of
Joe Lin
Sent: Monday, September 13, 2004 12:55 PM
To: vanagon@GERRY.VANAGON.COM
Subject: tool kit for vanagon

ok, what tools do people carry in their vanagons?  what is necessary for
those with engine conversions?

---------------------------------
Do you Yahoo!?
Shop for Back-to-School deals on Yahoo! Shopping.
---
Incoming mail is certified Virus Free by AVG.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.760 / Virus Database: 509 - Release Date: 9/10/2004

---
Outgoing mail is certified Virus Free by AVG.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.760 / Virus Database: 509 - Release Date: 9/10/2004