For pics of what seam rust looks like from the inside p-mail me. A little on
the outside most likely means a lot on the inside. If you really want it to
go away you'll need to attack from the inside.
Brien
Brien K Dews CC
www.busesbythebeach.com
(84' Westy)
www.allgoodtime.com
616-863-8463

----- Original Message -----
From: "Ed Hinchey" <EJHin@aol.com>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, September 17, 2004 8:09 AM
Subject: Re: Rust Project

> Rich,
>
> I had seam rust at the same location.  I sanded down to bare metal along
the entire seam, picked the seam clean and filed to bare metal with a small
file, applied the black rust inhibitor, two coats of primer, three coats of
finish color and a clear coat.  It lasted about two years - the source of
the moisture was from the inside.  I now have a mess as the seam is starting
to cme apart.   I am also interested in how to get after this and would be
interested in the responses to your request.
>
> Good luck.
>
> Ed
> 84 Westy
>