On 9/20/04 9:23 PM, "Vince S" <gipsyflies@COMCAST.NET> wrote:

> You must be using some very old solder with huge flux core. I have never
> experience this problem in decades of soldering.
> 
> 
>
When taught electronic circuit soldering techniques in civilian and military
tech schools for electronics, we were taught to use the thinnest solder
applicable to the joint/circuit and the appropriate iron for the job.  You
always verified your iron temp by melting the first bit of the solder wire
on your cleaned iron and wiped of on sponge.  Some minor changes for liquid
flux instead of cored solder.
����������������������������������������
jimt
Planned insanity is best.
Remember that sanity is optional.
http://www.tactical-bus.info (tech info)
http://www.westydriver.com