On 10/5/04 12:01 PM, "Jeffrey Schwaia" <jeff@vanagonparts.com> wrote:

> True, but not real problem.  Leave the EGR box in place with the wires
> hooked up and run the one piece speedo cable next to the EGR box.  Your EGR
> lights and your speedo will work fine.
> 
> BTW:  We sell the the one piece cable for $10.67
> 
> Cheers,
> 
> Jeff
> www.vanagonparts.com
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM]On Behalf
> Of jimt
> Sent: Tuesday, October 05, 2004 9:38 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: aircooled intake elbow
> 
> 
> On 10/5/04 9:37 AM, "The Bus Depot" <vanagon@BUSDEPOT.COM> wrote:
> 
>>> I am also looking for a good speedometer
>>> cable, the upper cable that connects from the
>>> egr box to the speedometer - but I need the
>>> later clipstyle, not the early screw style.
>> 
>> 
>> This cable will replace both the upper and lower cables (and do away with
>> the EGR warning box)...
>> 
>> http://busdepot.com/details.jsp?partnumber=251957803E
>> 
>> - Ron Salmon
>> The Bus Depot, Inc.
>> www.busdepot.com
>> (215)  234-VWVW
>> 
> Warning on that cable....what state are you in and how do they conduct air
> checks.  Here in colorado the light for the egr is required to pass.  So
> unless you do some wiring to make the light still function normally that
> cable cannot be used.  Same in California and others.
> 
> ����������������������������������������
Mark me down in the unthinking column for today.  Bypass the sucker and
leave it mounted as it is.

����������������������������������������
jimt
Planned insanity is best.
Remember that sanity is optional.
http://www.tactical-bus.info (tech info)
http://www.westydriver.com