You are refering to the recall campain the VW had years ago on the head
gaskets.   The campain fix was to add a 1/4 turn to the head gasket
torque nuts.  This was of little value unless you have a compression
leak.
                                                  ERic

Pascal Giasson wrote:

>I have searched the archives for information on how to retorque the heads
>with no luck.  My '84 westy is not leaking and the PO said that the heads
>had been retorqued by the VW dealer as part of a VW program to prevent the
>heads from leaking.  Is this something that I should re-check (the head nut
>torque) or does this just need to be done once?  Thanks
>
>Pascal
>'84 Westy
>
>
>On Wed, 6 Oct 2004 17:58:36 -0500, Mark & Laura Zaranski
><zaranski@VERIZON.NET> wrote:
>
>
>
>>OK, '87 7-pass gl with well over 160kmiles.  Some leaking evident from
>>
>>
>heads (drips on both sides) since acquisition, expected to need to redo
>heads at some point in not-distant future.  Vehicle came to me with a
>complete spare engine that includes newly reman'd heads, so I was not
>dreading the eventual need.
>
>
>>Tony Wolf (Wolf's Foreign Auto, Merrillville IN 219/942-0576) had the van
>>
>>
>for other stuff, when I picked it up he said "Your heads were leaking
>coolant like sieves!  I retorqued them and now they don't leak."  That was
>about 9 months ago.  Still no leaks!
>
>
>>Mark Z
>>Porter, Indiana
>>
>>
>
>
>
>