I was thinking of making some tubular bumpers and a rack as winter projects
but perhaps square or rectangular might be a good option but from what I
have seen they don't look as nice...

so.. as a request maybe you could show me your great looking bumpers and
roof racks made of square to rectangular tubing.

thanks,

peter

----- Original Message -----
From: "George Goff" <THX0001@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Thursday, September 30, 2004 10:48 PM
Subject: Re: Home Made Bull Bars--Pipe Benders

> In a message dated 9/30/04 6:31:22 PM, gary2a@TELUS.NET writes:
>
> << You
>
> can also use weld elbows and piece the whole thing together, no bending
>
> required.
>
> . . .  Also, all the bends
>
> will be either 90 or 45 degrees.  This does not look correct. >>
>
> This is not correct.  While in an ideal world all fit-ups would be made
> with
> 90's and 45's, the nice thing about butt weld ells is that they can be cut
> to
> any amount of sweep from 1 to 89 degrees.
>
> George
>