One of the best ways to get those stubborn bleeders out is to get a proper
size socket and use an impact wrench,
Starting out with light impact and progressing to stronger impacts will
often work well.

Stan Wilder
High Performance Ceramic Coatings
www.engineceramics.com

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Calle Fallberg
Sent: Friday, October 08, 2004 2:48 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: rusty brake bleed screws

Another choice is a hot air gun
The one I have came (from Bosch) with three different nozzels so you could
select what type of airstream you want and a choice between 250 and 500
degrees Celcius on the air ( that would be about 500/900 Farenheit ),
perfect for removing paint, loosening rusted details, shaping plastic
details or getting curly hair   :-)

Calle

----- Original Message -----
From: "Bio" <biobsd@VERIZON.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, October 08, 2004 3:27 AM
Subject: Re: rusty brake bleed screws

> Instead of using a torch, use a hair dryer. They can heat it up quit
> well and you don't have to worry about open flames.
>
> Just watch where you point it.
>

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.772 / Virus Database: 519 - Release Date: 10/1/2004

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.772 / Virus Database: 519 - Release Date: 10/1/2004