I've done this with my old carburated beetles, but how do you "chock it
down" on a fuel injected vanagon?  Last year I did my best by spaying some
engine fogger into each cylinder as per the instructions on the aerosol can
(pretty well had a heart attack when the little plastic straw used to get
the fluid into the combustion chamber disslodged from the spay valve and
flew into one of the combustion chambers...after calming down I figured I
may as well try to get it out the way it went in so I turned the motor over
by hand and out came the straw from the spark plug hole...I think they
heard me across town creaming with joy!)  Needless to say I am a little
timid about trying my luck with this fogging spray again this year.

Thanks

Pascal
'84 Westy

>"I'd run the engine until it got to full operating temps and then choke it
>down by running MMO (Marvel Mystery Oil) through it to kill it.
>That should coat the cylinder walls, valves, ports etc with MMO.
>>You can choke it down with regular motor oil if the MMO doesn't light your
>fire."

>Stan Wilder
>Engine Ceramics
>214-352-4931
>www.engineceramics.com
>