Just take some water pump (Channelock) pliers and squeeze the outer rail
just slightly. You can probably accomplish the same thing with a few good
taps from a hammer.

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com

----- Original Message -----
From: "Jerry Holland" <Xpecoach@AOL.COM>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, December 11, 2004 8:25 AM
Subject: Movement in front seats

> The front seats, in my 90 Carat, are not tight in the track. I've pulled
them
> out, even traded sides, and they both still move from side to side and
front
> to back. The adjusting bar is dropping into the slotted track but there is
> still some play. The plastic inserts are in place. The Vanagon has 90,000
miles
> on it so I don't think age is the problem. Any diagnostic help would be
> appreciated.
> Again, the movement is very slight, but still disconcerting when driving.
> I've tightened the allen head bolts on the underside of the seats.
> Jerry
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.296 / Virus Database: 265.5.0 - Release Date: 12/9/2004
>
>

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.296 / Virus Database: 265.5.0 - Release Date: 12/9/2004