

| Subject: | grill "pins" |
| From: | Tom Sullivan |
| Date: | Sat, 11 Dec 2004 19:19:09 -0800 |
I guess mine are not orginal as they are plastic "pins" that push in with a rectangular head but no screws :'( -----Original Message----- From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com]On Behalf Of Jack Sent: Saturday, December 11, 2004 5:01 PM To: vanagon@GERRY.VANAGON.COM Subject: Re: filling or refilling tranny? Same questions as Bill's plus one. Is it possible to tilt/park the Vanagon in such a way that more of or nearly all the old oil will drain (4 sp, manual, 2wd)? Or can this only be done with the tranny out? (Ok, that's 2 questions.) Thanks, Jack '85 Vanagon GL Weekender Date sent: Sat, 11 Dec 2004 15:44:20 -0800 Send reply to: "Bill H." <starfinder88@YAHOO.COM> From: "Bill H." <starfinder88@YAHOO.COM> Subject: Re: filling or refilling tranny? To: vanagon@GERRY.VANAGON.COM > If I wanted to drain my tranny and refill it with the Redline MT90 and it > still has 1.5 quarts of the original tranny oil in there, will mixing the > original and synthetic oil cause any trouble? Or do you have the take the > tranny out and really drain it all out? Just something in the back of my mind > for next springs list of things to work on. > > Bill H. > 88 GL > > --- Warren Lail <wlail@OU.EDU> wrote: > > > Okay, I just filled my 091 4-speed tranny with Redline MT90. The tranny > > is out of the bus and was totally empty. I carefully leveled it and pumped > > in 3.7 US quarts, but it did not bring it up to the bottom of the fill > > hole. So, I checked Bentley again and it says in a footnote that the > > capacities given are for a RE-fill because normally 1.5 quarts will remain > > in the tranny even after draining it (assuming, I think, that tranny is > > left in the vehicle and that the vehicle is level). > > > > > __________________________________ > Do you Yahoo!? > Send holiday email and support a worthy cause. Do good. > http://celebrity.mail.yahoo.com
Have something to add on this topic today? Revive this thread in the forum »