Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Just interesting observation
From:Stew
Date:Fri, 17 Dec 2004 17:13:39 +0000

John,
In a similar vein, the bike club I used to ride with here in the UK came
to a similar conclusion regarding
Kawasakis (work with me here...) People who used to leave the bike on
the sidestand (I think it's a
kickstand on your side of the pond) suffered from premature wear on the
cam shaft at one side, despite
correct oil pressure etc. The guys who used the centrestand never saw
this problem.
HTH,
Stew.
91 T25 Day-van

Anonymous Digest wrote:

>Just to pass along something interesting, mine is an 81 air cooled with
>lots of miles on it. Often when it sits more than a few days, it is one
>noisy bugger when I start it up, summer or winter, regardless of the oil
>of choice. Lifters or whatever are really loud.
>
>I am used to it, and what I have noticed is that it has sat for about six
>weeks outside, on a very slight incline in the driveway, nose up. Not a
>lot of hill, but its enough of an incline to make the basketball games
>interesting.....
>
>Anyway, when I would start it up after sitting on this small tilt, no
>excessive noise, clatter, or banging. Did it about three or four times in
>six weeks. Nothing. Sounded just perfect.
>
>I put it in the garage a few days ago for the CV joint adventure, and when
>I started it up today, the racket was back, and the clatter was pretty
>intense for about fifteen minutes.....
>
>The oil level is fine, so it almost looks like, in my case, sitting on a
>slight incline appears to nearly eliminate the "lifter syndrome" or
>clattering, or whatever one wishes to call it.
>
>Nothing spectacular, but I guess maybe I should get a pair of ramps and
>park it nose up when its in the garage. Can't really leave it out on the
>hill, as last year someone shot out the back window....
>
>Anyway, just something to say that is not related to the CV joints.
><shrug>
>
>John
>
>
>

Have something to add on this topic today? Revive this thread in the forum »