

| Subject: | Re: 1.9L spark plug &water pump suggestions? |
| From: | Zoltan |
| Date: | Sun, 2 Jan 2005 15:36:05 -0800 |
When you say "siliconing", what do you mean. Spray silicone on it or put some silicone calk on it? Zoltan ----- Original Message ----- From: "ROBERT DONALDS" <donalds1@VERIZON.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Sunday, January 02, 2005 10:59 AM Subject: Re: 1.9L spark plug &water pump suggestions? >I use JB weld to repair cases at the water pump surface on a regular basis. > Pitted aluminum is not something that JB weld sticks to very well so you > need to use a drummel tool and clean the hole out and then do the repair. > if its a in van repair consider siliconing the new oring after cleaning > the > surface as best you can > Bob Donalds > > > ----- Original Message ----- > From: "Daryl Christensen" <aatransaxle@DIRECWAY.COM> > To: <vanagon@GERRY.VANAGON.COM> > Sent: Sunday, January 02, 2005 12:44 PM > Subject: Re: 1.9L spark plug &water pump suggestions? > > >> Regarding the pitted waterpump surface...Using JB is fairly common to >> make >> sure this area will seal correctly. I and many other have done it >> professionally for years with no issues. Smooth on with a very flat blade >> ( I use a razor blade) and hit it with a flat file after its dry to be >> sure >> the area is truly flat. >> I use W7DTC plugs (the tripple electrode style)...never liked platinums >> much...but the wr7dp should work... >> Daryl of AA Transaxle >> Duvall, WA. (Seattle area) >> 1-877-377-0773 toll free >> 425-788-4070 >> aatransaxle.com >> >> ----- Original Message ----- >> From: "Jonce Fancher" <streetbugs@WHISPLLC.COM> >> To: <vanagon@GERRY.VANAGON.COM> >> Sent: Saturday, January 01, 2005 9:32 PM >> Subject: 1.9L spark plug &water pump suggestions? >> >> >>> *** also i pulled the water pump off and found small pitting at the seal >>> O-ring area. is it best to use a very small amount of gasket material >>> and >>> if so what type and >>> brand would be best or try and fill it with something such as JB weld ( >>> not a favorite) or something else?? just concerned that it may not seal >>> with out something. >>> thanks Jonce >>> >> >
Have something to add on this topic today? Revive this thread in the forum »