Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: melted plastic in fuse panel area during relay install
Date:Fri, 7 Jan 2005 03:32:05 EST

In a message dated 1/6/05 9:47:36 PM Eastern Standard Time, tolga@MAC.COM
writes:

> ,
>   I've been installing headlight relays on my 84 1.9L water-cooled
> Vanagon and have noticed some meltdowns in and around the fuse panel
> area...
>
> -The first I saw was on one of my OEM relays already in the Van.  Not
> sure what it's for but it is the closest one to the front end (firewall?)
> of the van.  It is the front-most of 3 relays (I assume all the little
> black square units to be 'relays') that are against the body of the van,
> there are two more further out and adjacent to the first row.  It's
> marked with "Bosch" "0 332 204 150" "12V 20/30A" and is melted on the
> back third of the unit.  I'm thinking it should be replaced.  Are these
> still available new?
>
>

do u have a/c and does it work?

chris