Joe, et al:
Take the flame spreader off of the bad burner.  It twists about a quarter
turn and then lifts off. My left burner was clogged; it had spider webs
inside and did the same as yours.
With the spreader off, I burned the webs away and the gas flowed properly.
Be careful, with the spreader removed the flame will shoot up about 4 inches
or so.  I imagine a pipe cleaner or two would do the trick, also.  I was out
in the woods and did not have any.
HTH.
--
Stephen
Chillicothe OH

Happy Mooo Year from COWs (Central Ohio Westies)

on 1/1/05 4:51, Joseph Heil at jose5353@EARTHLINK.NET wrote:

> Was wondering if anyone else has had similar issues with stove. Haven't
> been able to find any references for disassembly/repair
> of stove for my 87 Westy.
>
> Basically, one burner works fine, the other is the problem.  It lights
> but just burns on very low flame even if the gas is full on.  I'm
> thinking there might be something in the line but am at a loss as to
> how to take off the burner to get in there.
>
> Any help or advice is much appreciated.
>
> Joe