Good Morning TJ,

With the radio on and the display reading "SAF e", press both the "AM/FM"
button and the "Scan" button for more than 3 seconds. "SAF e" will disappear
and you will see 1000 displayed. Using the square station preset buttons,
tap in the code number by repeatedly pressing the corresponding station
preset button, i.e. 1 push for 1, 7 pushes for 7. You can go back and forth
till you get it right as long as you don't dawdle too much. When the code is
correct, depress both the "AM/FM" and "Scan" buttons for more than 3 seconds
and you should have the FM band displaying 87.9, and you are good.

Hope this helps,

Dave Milo

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf Of
TJ Hemrick
Sent: Sunday, January 09, 2005 6:21 AM
To: vanagon@GERRY.VANAGON.COM
Subject: Van Stuff

Stop the power discussion or take it to a power list.  I'm here for
VANAGON info!

Rant over.

OK, I started looking at list messages around 0600 EST.  Does that mean
I have some sort of disease???

Anyone know which buttons to push so I can enter the code into my
factory radio and get rid of the SAFE message?  The PO thoughtfully
wrote the code in several places in the factory manual but lost the
radio manual.  I'm out in my 88 pushing buttons hoping I'll hit the
right combo.

Thanks
TJ

__________________________________
Do you Yahoo!?
Read only the mail you want - Yahoo! Mail SpamGuard.
http://promotions.yahoo.com/new_mail

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.9 - Release Date: 1/6/2005