The stock wiring for the emergency brake light switch goes underneath
the carpet. I found it relatively easy to run cables behind the dash
and then under the carpet (especially on the drivers side) since the
stock carpeting is (more or less) a solid homogeneous mass up to the
front "firewall" across the front footwells and through the center
aisle between the seats. Probably easier to lift the carpet from the
drivers side  (as it already lifts up partly so as to provide access to
the windshield wiper fluid resevoir refill opening.

On Feb 19, 2005, at 7:46 PM, Andy Stalick wrote:

> Any tips on running cables down and out of the dashboard?