Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Engine overheating
From:George Goff
Date:Sun, 27 Feb 2005 00:58:43 EST

In a message dated 2/26/05 2:33:29 PM, wlail@OU.EDU writes:

<< . . .check the short line that goes from the cooling rail (situated around
the top of the engine compartment) to the top of the thermostat housing.
When I replaced my engine and all hoses last year, I found that particular hose
100 percent occluded. >>

I can't recall for certain if that line is the same on a straight van as the
one on a Syncro, but on the Syncro it is the vent line for the engine bleeder
and so it is valved off anyway except whenever the cooling system is bled.  Of
course, the engine might not be purged of air completely if it can't vent
through that orifice.

George