We just grabbed an extra bolt from another engine.  (For the double nut)

And then put the O-Ring on dry (it has special tabs on it to keep it in
place) and it worked great.

Tom

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Edward Maglott
Sent: Thursday, March 03, 2005 8:27 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: replacing oil cooler O-ring

I plan to try to use the method described below.  But what about the O-ring?
Do you put sealer or oil, or nothing on it?
Thanks,
Edward

At 04:21 PM 3/3/2005, you wrote:
>I'm sure Ken's method would work great and it is a good idea to change
>you coolant.
>
>But when the o-ring on my '86 GL gave out this winter I didn't have to
>clamp off, cut or remove the coolant lines.  I simply took off the
>filter, double nutted the shaft and then you can take the "box" out,
>replace the o-ring and put it back together.
>
>Good luck,
>Tom