Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: [syncro.org] Wheel offset
From:mark drillock
Date:Sun, 6 Mar 2005 15:45:35 -0800

The 7" wide ET45 Audi rims are a problem on the 2wd. The earlier Audi
ET45 Turbo wheels were only 6" wide so rim clearance was often less of
an issue than tire clearance.I would start with at least a 9/16" spacer
and see how the fit is but I would not be surprised if  you end up
needing close to an inch. You may need to use stick on tire balancing
weights since the hammer on type go where clearance is tight. After you
have the minimum spacer determined for the rims then try tires.
Different brands and models have slightly different dimensions even on
tires that are the same "size". I have used 215/75/15 on various
Mercedes, Audi, and Passat wheels. They are the tallest and widest
practical 15" size in some respects. Many people are looking for
something entirely different in tires but that is the size I use. My
main interests lie with Syncros so I will let others speak up for 2wd
fitments.

The Mercedes 6.5x15 ET37 is a better starting point IMHO, and not that
hard to find from 1990s C220/230 models, as well as being attractive in
the eyes of this beholder. You would still need spacers.

Mark

>
>
> What size spacers did you use with what size tire? The reason is they are
> available reletively cheaply from a friend. I could get them and tires
> for
> almost as much as the SA wheels would cost.
>
>
>
> Michael Knight
> '77 Westy Deluxe, "el Verde"
> '85 Vanagon GL, nameless
> http://photos.yahoo.com/electrictrain@sbcglobal.net
>