Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fixing case damage due to water pump impeller
From:Frank Condelli
Date:Mon, 7 Mar 2005 06:05:43 EST
In a message dated 06/03/2005 11:39:01 PM Eastern Standard Time,
LISTSERV@GERRY.VANAGON.COM writes:

Frank  Condelli fixes damage to the case by water pump
impellers using JB  Weld.

I'm a bit paranoid it might fall off and gum up the  works.
Anyone use anything else, or have experience with a
repair like  this lasting a long time?

The JB Weld will not fall off as long as your prep  the surface properly and
follow the directions on the JB Weld  package.

Cheers,

Frank  Condelli
Almonte, Ontario, Canada
_BusFusion_ (http://members.aol.com/BusFusion/bfhome.htm)  a VW Camper
camping event, Almonte, ON, June 09 ~ 12, 2005
'87 Westy, '90 Carat &  Lionel Trains
Member: _Vanagon List_ (http://www.vanagon.com/) , _LiMBO_
(http://www.bcn.net/~limbo/) , _IWCCC_ (http://www.westfalia.qc.ca/)  & _CCVWC_
(http://www.ccvwc.ca/)
Vanagon/Vanagon Westfalia Service in  the Ottawa Valley
_STEBRO/Vanagon Stainless Steel  Mufflers_
(http://members.aol.com/Fkc43/stebro.htm)
_Frank Condelli &  Associates_ (http://members.aol.com/Fkc43/busindex.html)
or  http://frankcondelli.com