There is in fact a screw in there. It's a regular slotted type, not phillips. I took a cheap, tiny screw driver and put a slight bend in it, you'll understand when you try to put a non bent one in there. You're able to get about one half a turn before you have to reinsert the screwdriver again.
Good luck

"Matthew C. Huntley" <matthew.huntley@STRATHBOGIE.NET> wrote:
I need to remove the latch on the Sliding Window on the Sliding Door.
There is a problem with the way it locks(or does not) and I want to work
with it a bit.
I think there is a screw in the hole in the bottom, but I am having a hard
time engaging it. Does anyone have any ideas or experience with this?

thanks,
matt

--
Any opinions stated here are my own, otherwise someone else would have
said them.