On 4/12/05 15:27, "Leon" <korkwood@WSHOST.NET> wrote:

> While installing new clutch cylinder I noticed lots of free play in
> clevis pin pushrod.Closer look revealed worn out hole for pin.
> Any suggestions other than replacing pedal assy?
> wait untill it wears thru?
> TIA
> 
> 

Don�t know if either of these will work but on different items I have used
one of the three techniques

Drill both sides out for next larger diameter pin

Drill just worn hole and "sleeve" it to use orig size pin

Weld worn hole shut and redrill.

����������������������������������������
jimt
Planned insanity is best.
Remember that sanity is optional.
http://www.tactical-bus.info (tech info)
http://www.westydriver.com