

| Subject: | Ignition points wear |
| From: | Jonathan Poole |
| Date: | Thu, 14 Apr 2005 21:42:39 -0400 |
Howdy List, My air cooled '82 westy is still running a breaker type ignition system. My engine and I are big fans of fresh bosch points with the ignition settings precisely adjusted. I installed my most recent set of points in Memphis tn on my way east to Asheville NC. The dwell was just around 47 when I left Memphis but when I got to Asheville the point gap had reduced itself to less than a tenth of an inch. The engine had become difficult to crank and had less power. I performed an ignition tune up and all was back to normal. That was two weeks ago with very little driving since then (300 miles or so). Yesterday I noticed a bit of sluggishness which turned out to be a reduced point gap. The dwell had gone from about 45 (I set it a bit low just in case the points settled some more) to around 55. I have been using a lightweight lube on the distributor lobes. Anybody have any tips or techniques to share. How long can most of you go before your dwell and timing need to be reset?? I am considering making the switch to a breakerless system because I am getting tired of the tune-ups. Setting everything is easy but as those of you who full-time it know,, getting the tools and engine unearthed takes twice as long as the tune-up itself.. Thanks ya'll Jonathan Poole
Have something to add on this topic today? Revive this thread in the forum »