On 4/7/05 4:17, "Frank Condelli" <RAlanen@AOL.COM> wrote:

> Shawn, I would highly recommend that you POR-15  that slave cylinder bracket
> while you have it off.  After reinstalling it,  POR-15 the area on the bell
> housing where it sits.  If the support area for  the bracket has corroded
> away,
> a machine shop can make and install a brass  bushing to repair this area.  I
> have this done locally for $35 to bell  housings that have lost the bracket
> support area to corrosion.
> 
> Cheers,
> 
> Frank  Condelli
> Almonte, Ontario, Canada

The corrosion on my old bracket was definitely noted.  Didn�t por it but
used another inhibitor after sanding it down real good.

����������������������������������������
jimt
Planned insanity is best.
Remember that sanity is optional.
http://www.tactical-bus.info (tech info)
http://www.westydriver.com