In a message dated 4/21/05 4:25:08 PM Eastern Daylight Time, alan@DATAX.COM
writes:

> I need to replace my rear window wiper motor.  Is there a trick to getting
> the little tabs off that hold the trim panel off?  Everytime I try, it
> seems like I'm going to rip it or damage the panel.
>
> Thanks!
>

depends on what model you have.  those with exposed snaps...those are a one
time deal.  i dont care what enyone else will tell you, you will either F up
your hatch panel or the clips..  you cant save them both.   if you are careful,
you might be able to salvage a few.   get yourself a trim panel tool  (looks
like a small prybar with a forked head, or a big flathead screwdriver, and a
pair of wire cutters or needlenose pliers..and a rag or block of wood to keep
from scratching the paint.

basically its a pain in the butt..  and if u get new clips, buy them from
NAPA.. the universal black plastic ones with the phillips head.. they are
re-useable. you screw them in, it expands the tabs on the back.  paint them grey or
tan if u dont like black..

chris