

| Subject: | Re: Stalling at stop lights |
| From: | John Rodgers |
| Date: | Mon, 25 Apr 2005 21:53:32 -0500 |
Dennis, I don't mean to stir the pot to much, but........ My 85 GL had the 1.9L WBX with the Digifant Fuel Injection. My Bentley clearly shows on page 24.31 Fig 24-115 wiring harness to the idle stabillizer for the Digifant FI system on the 1.9L WBX. Also, page 24.46 Fig. 24-182 clearly shows the idle stabilizer control valve. Regards, John Rodgers 88 GL Driver. Dennis Haynes wrote: >85 1.9 does not have an idle stabilizer valve. Idle stabilization is >done by advancing the ignition timing. > >Dennis > >-----Original Message----- >From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf >Of John Rodgers >Sent: Monday, April 25, 2005 12:05 PM >To: vanagon@GERRY.VANAGON.COM >Subject: Re: Stalling at stop lights > >With the engine warm, diusconnect the idle stabilizer valve. Drive it a >bit and see what happens. > >I had an 85 GL with 1.9L WBX and it did exactly what you are talking >about. I did the test. it was the valve. > >John Rodgers >88 GL Driver > >John Schaper wrote: > > > >>84 1.9L westphalia, manual transmission. Relatively (less than 5K >> >> >miles) > > >>new valves and heads. Its been running great with an idle RPM of >> >> >around > > >>1,000. But over the weekend, while stopped at stop lights, over the >> >> >course > > >>of 20-30 seconds, the rpm's decline, engine runs rough, engine dies. >> >> >Vacuum > > >>lines new and connected. What else might I look for? >> >>John Schaper >>Assistant Director Ancillary Services >>Health Services Agency >>P.O. Box 3271 >>Modesto, CA 95353 >>209.558.7102 >>209.558.8320 (fax) >>jschaper@schsa.org >> >> >> >> >> >> > > > > > >
Have something to add on this topic today? Revive this thread in the forum »