On 4/27/05 21:57, "Kim Brennan" <kimbrennan@MAC.COM> wrote:

> Bah. I just was double reading (well, I've read it a few more than
> twice) the Propex manual. They recommend using 8mm (not 9mm) propane
> lines. 8mm is 5/16 or thereabouts, which is not a commonly used size in
> the USA (1/4 and 3/8, 1/2 and 3/4 are the common US copper sizes...not
> all used for propane of course.)
> 
> 
> On Apr 27, 2005, at 12:43 AM, Kim Brennan wrote:

I takes a bit of searching but you can find compression fittings to change
to the common 3/8 line used by most US equip.  if I remember correctly last
time I picked a 5/16 compression to a 3/8 flare at either home depot or ace
hardware.
����������������������������������������
jimt
Planned insanity is best.
Remember that sanity is optional.
http://www.tactical-bus.info (tech info)
http://www.westydriver.com