

| Subject: | Re: Brake lining fell off brake shoe |
| From: | John Erickson |
| Date: | Wed, 11 May 2005 21:43:03 -0700 |
Beetle Auto Service for VW or Searles Automotive. Can't go wrong at either place. John '87 Syncro Country Homes ----- Original Message ----- From: "mark drillock" <drillock@EARTHLINK.NET> To: <vanagon@GERRY.VANAGON.COM> Sent: Wednesday, May 11, 2005 7:03 PM Subject: Re: Brake lining fell off brake shoe >I had this same problem on an old VW of mine a couple weeks ago. I > removed the rear drums to see what was going on and the friction > material was almost completely delaminated from the metal part on one > shoe. The linings were as new otherwise. On the edge of the separated > lining were the words "Made In Canada", with zero wear visible on the > lining. I would sure like to think that this was a one in a million > occurrence. The vehicle had sat for some unknown number of years but > that hardly excuses the failure. > > Mark > > Martin Jagersand wrote: > >>Hi, >> >>I had an unexpected problem yesterday a few days into my >>Vancouver island trip. The brake lining came off the brake >>shoe. It's not that the lining was worn thin (it's a good 5-6mm >>thick), but somehow it still came off the shoe. I noticed it >>as an odd sound when braking. I took off the drum and found the >>lining loose inside. Amazingly neither the drum, not the lining >>was damaged.m >> >>Being on a trip and not exactly knowing my options for getting help >>I used some hing temperature epoxy glue and simply glued the lining back >>on. (Handy with the vacuum assist brakes to apply pressure during >>the cure time...). >>So far it seems to work (obviously being careful nursing the van) >> >>Now I was curious what might other solutions to "in the sticks repair" >>might be? Maybe I should have just disabled the right rear brake >>for the drive to town? To do this what kind of plug/screw would fir the >>brake >>hose end? >> >>Any other suggestions? >> >>I was also curious how the brake lining is normally attached? >>Most others I've seen are riveted, but this one had no signs of >>rivets in the lining. >> >>Also: Any suggestions for shops in Victoria,BC that could help me? >>(and would have things like Vanagon brake shoes in stock or quickly >>available). I'm staying in the U.Vic campus housing until I get >>this fixed. >> >>Cheers, >>Martin (And '82 Westy 1.9TD) >> >> >> >
Have something to add on this topic today? Revive this thread in the forum »