>From: Jeff Oxroad

>I got the blue flexible circuit board from, I think an 85  Vanagon, maybe
>an
>84, with a tach and attached to the "newer" tach and  cluster pod.

>I also used my original speedo from the 83. And now that I think of it that
>83 speedo kept any current from getting to the oil pressure idiot light if
>I
>used any curicut board from a 2.0 L vanagon. The 83 speedo does not have a
>buzzer system at all.

>So the way the later model (2.0L) curcuit board was routing the current, it
>wanted to access the L shaped circuit board with the buzzer in the speedo
>first,  then send power to the idoit light through the L shaped board. But
>with no
>L  shaped circuit board in the speedo the current just ender there and no
>power got  to the light.

>So again I got the blue flexible curcuit board from an 84 or  85, which
>both
>had the 1.9L and I believe had the tachometer as an option. So  there was
>the
>"optional" curcuit board available which was wired to give the  tach power
>and
>get power to the oil pressure light as well. This board had  no provisions
>for the buzzer because at that time it wasn't installed on the  Vanagon.

So if I am reading this correctly the L shaped circuit is in the speedo.

I have an 87 housing and cluster, including the flexible circuit.
I have the speedo that originally came from my 85.

If I swap the speedo from the 87 cluster with the 85 this would cure my
buzzer headache?

Michael Knight
'77 Westy Deluxe, "el Verde"
'85 Vanagon GL, nameless
http://photos.yahoo.com/electrictrain@sbcglobal.net