Found my bolts.
Thanks All

Stan Wilder
Engine Ceramics
214-352-4931
www.engineceramics.com
----- Original Message -----
From: "Stan Wilder" <wilden1-1@SBCGLOBAL.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Saturday, June 04, 2005 7:18 PM
Subject: WTB - I need a set of Case bolts Type IV Engine

> WTB - I need a set of Case bolts Type IV Engine
>
> That pretty much says it.
>
> I've seen a few sources over the years appear on Vanagon but never kept
the
> addresses.
>
>
>
> Stan Wilder
> Engine Ceramics
> 214-352-4931
> www.engineceramics.com
> ----- Original Message -----
> From: "Roger Sisler" <rogersisler2000@YAHOO.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Saturday, June 04, 2005 3:40 PM
> Subject: Re: Sputter/Low power at start
>
>
> > Dont really know at all what may be the problem.Just dont like to see
all
> > these engine problems go unresponded to, on a weekend even.Try checking
> the
> > hose that goes to the auxillery air valve.Dont know if a 91 has this
> > valve.It would be on the right side of the engine near the
throdel(sp),but
> > below it.Attached to the case , under the intake pipes.May need a
> > flashlight to see it. Look at go westy online cataloge to see a picture
of
> > what it looks like.It is called auxillery air regulater. Try pinching
> > various hoses with pliers to see if you get a change from
sputtering.Good
> > luck, Roger Sisler.
> >
> >
> > --
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005
> >
> >
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005
>
>