Hi,

My digifant wont start.  Plenty of juice, starter is cranking, have a spark.

I took off one set of injectors, kept them connected, disconnected the
other side, cranked, and it was DRY.  I realized I was a low on gas (not
empty) but parked on a steep hill.  Put in 4 gallons, still wont start.

The led for the fuel pump on my digitool lights up upon turning the key,
and flickers when I am cranking.

Hall sender shows 10.5 volts.

I removed the fuel line at the T that goes to the injectors, and some fuel
came out, but not with any amount of pressure like I would expect.

Ideas?  Im about maxed at my knowledge here..

Thanks,

jeff